Detail
» Flush mount rear access walk on luminaire IP rating 65 Room-side, & IP 65 Top side.
» Walk on capability to BS6399 single point load min 0.9kN.
» The flush mount walk-on luminaire is designed to flush fit (top & bottom) into composite load-bearing ceiling panels 50mm thick and upward. The unique integrated central strengthening member gives the luminaire full walk-on capability and provides a separate gear compartment, which also acts as a safety rail to prevent accidental fall through when the lid is removed for maintenance.
» The body of the luminaire is of split-frame design with no visible screws on the underside manufactured from heavy gauge steel of welded construction. Finish powder coated RAL colour of choice.
» Although these luminaires are of shallow depth the internal temperature does not exceed 40°C using T5 HE lamps.
Return to Top of Page
Construction
Body: |
Heavy gauge Zintec steel 2-part sandwich construction powder coated RAL colour of choice. |
Gear Tray: |
Heavy gauge centre safety channel support and gear housing. |
Frame: |
Fabricated steel painted RAL colour of choice. |
Control Gear: |
Standard T5 high frequency with dimming options. |
Diffuser Options: |
PC: Clear Prismatic Polycarbonate (Prisms up)
PTPA: Clear Prismatic PETG TPa rated.
TG-P: Composite 4mm thick toughened glass with Clear Prismatic panel (Prisms down) |
Luminaire Options |
Front Access Only
Dual Access |
Optional Extras |
Self contained 3-hour emergency packs including self-test and addressable systems. |
Return to Top of Page
Size Information
Description |
Nominal Size |
|
42T4/28W T5 |
(1200mm x 600mm) |
|
32T4/21 T5 |
(1000mm x 600mm) |
|
22T4/14W T5 |
(600mm x 600mm) |
|
Return to Top of Page |
